Fixed the Tool Tube good & proper!
(I know - I need to round off those sharp edges! Will be doing that tomorrow night.)
I fabricated an aluminium bridging strut that is held to the pannier rack on one side via a worm gear hose clamp and bolted into the frame at the other.
Next was to install a 12 volt cigarette socket to be used when charging my phone or camera.
This was positioned up in the console - requiring me to drill a 28 mm hole!!!
Oh I nearly forgot to mention, I also installed the Tiger Explorer optional foot pegs.
They don't stick out as far and have a larger area for your feet.
(I know - I need to round off those sharp edges! Will be doing that tomorrow night.)
I fabricated an aluminium bridging strut that is held to the pannier rack on one side via a worm gear hose clamp and bolted into the frame at the other.
Next was to install a 12 volt cigarette socket to be used when charging my phone or camera.
This was positioned up in the console - requiring me to drill a 28 mm hole!!!
Oh I nearly forgot to mention, I also installed the Tiger Explorer optional foot pegs.
They don't stick out as far and have a larger area for your feet.
Nice job. I Like that tool tube placement.
ReplyDelete